Hyper-V Server 2012 R2 usb install questions
I'm new to virtualization. I completed the steps to usb boot on a 32GB Kingston DataTraveler Ultimate usb with a 28GB vhd following the directions...
View ArticleHyper-V Server 2012 R2 usb install questions
I just did what you're doing and found it to be slow as well...especially with updates.Microsoft has info here. Opens a new windowI've read elsewhere (can't find the link) to leave 20% of the usb...
View ArticleHyper-V Server 2012 R2 usb install questions
I've always been reluctant to try this due to the number of failed USB flash drives I've encountered over the years, most recently a 32GB DataTraveler G3 just up and died on me after lightly using for...
View ArticleHyper-V Server 2012 R2 usb install questions
FYI- just looked up the USB stick you referenced, I think it the same one that just crapped out on me! Hopefully you have better luck with it!!Mine was DTU30G3/32GB
View ArticleHyper-V Server 2012 R2 usb install questions
Hi!Out of curiosity, why are you using usb-stick, it will be very slow, no matter what. I'd suggest to install it on your raid. Creating two volumes should not be a problem, if you want to have vhds...
View ArticleHyper-V Server 2012 R2 usb install questions
I have a clone of the drive so I'll always have a backup just in case. I'll try making the vhd 12GB and see if that makes any difference.hyvokar - I'm not sure exactly why, but I've read it in a couple...
View ArticleRe: Hyper-V Server 2012 R2 usb install questions
gb5102 wrote:I've always been reluctant to try this due to the number of failed USB flash drives I've encountered over the years, most recently a 32GB DataTraveler G3 just up and died on me after...
View ArticleHyper-V Server 2012 R2 usb install questions
I made the Hyper-V vhd 12GB on the 32GB usb and it's a lot more responsive. Couple other questions - I now have one 4.8TB volume. When I create the vhd for Essentials, do I size it for the full 4.8TB?...
View ArticleHyper-V Server 2012 R2 usb install questions
If it were me I would create a smaller 'fixed' .vhdx for the OS(I find 150GB to be more than enough for most servers) and a larger dynamic .vhdx for the 'data drive'. The new .vhdx format is...
View ArticleHyper-V Server 2012 R2 usb install questions
jonludwig wrote:gb5102 wrote:I've always been reluctant to try this due to the number of failed USB flash drives I've encountered over the years, most recently a 32GB DataTraveler G3 just up and died...
View ArticleHyper-V Server 2012 R2 usb install questions
I abandoned the boot to usb plan. The DataTraveler was on the Microsoft list of devices but seemed too slow for me.Since I've gone to booting to dedicated spinners, I've used the DT to help migrate...
View ArticleHyper-V Server 2012 R2 usb install questions
fiftyincher wrote:I made the Hyper-V vhd 12GB on the 32GB usb and it's a lot more responsive.Couple other questions - I now have one 4.8TB volume. When I create the vhd for Essentials, do I size it for...
View ArticleHyper-V Server 2012 R2 usb install questions
I think you're right about the heat Bill. It was quite warm when I shut the server down to pull it and clone it. Cloning it really made it hot. I'll go back to a small volume for Hyper-V and a large...
View Article
More Pages to Explore .....